3-Hole Fireclay Bricks

  • Alumina (Al₂O₃) Content: ≥45%
  • Iron Oxide (Fe₂O₃) Content: ≤2.0%
  • Bulk Density: ≥2.15 g/cm³
  • Cold Crushing Strength: ≥40 MPa
  • Refractoriness Under Load: ≥1410°C
  • Thermal Shock Resistance: ≥20 cycles at 1100°C water cooling
  • Type: Fired Clay Refractory Brick

3-Hole Fireclay Bricks are specially shaped refractory bricks designed with three holes to provide a lightweight structure and support heat insulation in industrial furnace applications. Manufactured from selected refractory clay, high-quality homogenized raw materials, and appropriate additives, these bricks undergo fine grinding, mixing, high-pressure forming, and controlled high-temperature firing to develop a stable refractory structure.

The main mineral components of fireclay bricks include kaolinite and other aluminosilicate phases, with controlled amounts of impurities such as potassium, sodium, calcium, titanium, and iron oxides. Their chemical composition and manufacturing process influence refractoriness, mechanical strength, porosity, and thermal performance.

As a type of clay refractory product, 3-Hole Fireclay Bricks are suitable for selected furnace linings, insulation layers, and high-temperature equipment where their hole structure, thermal properties, and dimensional specifications meet the requirements of the application. Fireclay materials generally exhibit good resistance to acidic slags and gases, while their resistance to alkaline substances depends on the specific operating environment.

Low Porosity Fire Clay Bricks
Low Porosity Fire Clay Bricks

Technical Specifications of 3-Hole Fireclay Bricks

The following table provides reference physicochemical specifications for selected fireclay refractory brick grades. These grades are reference data for fireclay products and should not automatically be treated as certified specifications for every three-hole brick design.

ItemUnitPN-42PN-40PN-35
Al₂O₃ Content%≥42≥40≥35
Fe₂O₃ Content%≤2.0≤2.0≤2.5
Apparent Porosity%≤20≤24≤26
Bulk Densityg/cm³2.10–2.252.05–2.201.95–2.10
Cold Crushing StrengthMPa≥45≥35≥30
Refractoriness Under Load, 0.2 MPa°C≥1400≥1350≥1320
Permanent Linear Change%-0.4 to +0.1 at 1400°C × 2 h-0.4 to +0.1 at 1350°C × 2 h-0.4 to +0.1 at 1300°C × 2 h

Note: The figures above are reference specifications for the listed fireclay grades. Final product parameters depend on the selected grade, manufacturing process, and three-hole brick design. Please confirm the applicable specifications with the Xintai Refractory before ordering.

Product Features of 3-Hole Fireclay Bricks

  • Three-Hole Structure: The three-hole design provides internal voids that can reduce brick weight and support thermal insulation, depending on the brick dimensions and hole configuration.
  • Good Refractoriness: Manufactured from refractory clay and selected aluminosilicate raw materials, these bricks are suitable for various industrial thermal applications.
  • Stable High-Temperature Performance: Controlled raw materials and firing conditions help provide dimensional stability and mechanical integrity during service.
  • Good Thermal Shock Performance: Fireclay materials generally tolerate temperature fluctuations well, with actual resistance depending on the grade, porosity, and operating conditions.
  • Resistance to Acidic Slags and Gases: Their weakly acidic refractory characteristics make them suitable for selected environments involving acidic furnace atmospheres and slags.
  • Controlled Chemical Composition: Available grades can be selected according to alumina content, iron oxide limits, porosity, density, and strength requirements.
  • Multiple Grade Options: Different fireclay brick grades are available to accommodate varying temperature conditions and mechanical requirements.
  • Custom Shapes and Dimensions: Brick dimensions, hole arrangements, and shapes can be customized to suit specific furnace structures and installation requirements.

Applications

3-Hole Fireclay Bricks can be considered for various industrial furnaces and thermal processing systems. Their suitability depends on the service temperature, load conditions, atmosphere, and required insulation performance.

  • Industrial Boilers: Used in selected boiler lining and refractory construction sections where fireclay bricks are compatible with the operating conditions.
  • Glass Furnaces: Suitable for certain non-contact furnace lining sections and supporting refractory structures.
  • Cement Kilns: Applicable to selected auxiliary furnace structures and thermal equipment where the temperature and chemical environment meet the brick’s performance limits.
  • Gas Generators: Used in appropriate sections of industrial gas-producing furnaces and related thermal equipment.
  • Blast Furnaces and Hot-Blast Stoves: Considered for selected auxiliary or supporting refractory sections according to the required grade and design.
  • Coke Ovens: Suitable for compatible refractory construction and supporting sections in coke-processing equipment.
  • Electric Furnaces: Used in selected furnace lining and thermal insulation structures.
  • Heating and Annealing Furnaces: Applicable to appropriate heating chambers, furnace walls, and supporting refractory sections.
  • Industrial Flues and Ducts: Used in selected high-temperature gas passages where the chemical atmosphere and service conditions are compatible with fireclay materials.

The appropriate grade and installation position should be determined according to the actual operating temperature, mechanical load, gas composition, slag exposure, and thermal cycling requirements.

Customization Services

Xintai Refractory provides customized fireclay brick solutions for industrial furnace construction, maintenance, and refractory lining projects.

  • Dimensions: Standard and non-standard sizes available according to project requirements.
  • Hole Configuration: Three-hole arrangements and hole dimensions can be discussed according to the intended application and manufacturing feasibility.
  • Brick Shapes: Straight bricks, wedge bricks, arch bricks, and other special-shaped refractory products available upon request.
  • Material Grades: Different fireclay grades can be selected according to alumina content, strength, porosity, and operating temperature.
  • Application-Based Selection: Recommendations can be developed using furnace drawings, service temperature, installation location, and operating conditions.
  • Packaging Customization: Packaging and product identification can be arranged according to order requirements.

For an accurate quotation, buyers are encouraged to provide the required brick dimensions, hole specifications, estimated quantity, target grade, and intended application.

Packing and Shipping Details

3-Hole Fireclay Bricks are packed to help protect their edges, surfaces, and overall structure during handling and transportation.

  • Packing Method: Wooden pallets with protective wrapping and reinforced steel straps.
  • Delivery Time: Typically 15–40 days, depending on order quantity, product specifications, and customization requirements.
  • Shipping Methods: Sea freight, railway transport, air freight, or truck transportation, depending on the destination and shipment arrangements.
  • Export Packaging: Packaging details can be coordinated according to transportation distance, handling requirements, and destination conditions.

Proper palletization and loading procedures help reduce the risk of breakage during domestic and international transportation.

Xintai Packing and shipping details
Xintai Packing and shipping details

About Xintai Refractory

Xintai Refractory is a professional refractory manufacturer with more than 20 years of experience in producing refractory materials for high-temperature industrial applications. Our product range includes refractory bricks, insulating bricks, castables, ramming masses, and other monolithic refractory solutions.

Serving customers across industries such as steel, cement, glass, ceramics, petrochemicals, power generation, and non-ferrous metallurgy, Xintai Refractory provides products designed to meet different thermal, chemical, and mechanical requirements.

With controlled manufacturing processes, quality inspection, and customization capabilities, we support customers in selecting suitable refractory materials for furnace construction, equipment maintenance, and industrial thermal processing projects.

Contact Xintai Refractory for a Quote

If you are sourcing 3-Hole Fireclay Bricks for an industrial furnace or refractory lining project, contact our team with your required dimensions, technical specifications, and order quantity. We can help confirm suitable product grades and discuss customized manufacturing options for your application.

Related Products

More Refractory Products from Xintai Refractory

Please tell us your requirement by referring to the following aspects:

To provide you with an accurate quote and tailored solution, please specify your requirements based on the following aspects:

  1. Type of Refractory Products:
    What kind of refractory materials are you looking for? (e.g., fire bricks, castables, ceramic fiber, graphite products, etc.)

  2. Product Specifications:
    Please include detailed requirements such as size, quantity, working temperature, shape, etc.

  3. Application Industry:
    Which industry or application are you planning to use the refractory products in? (e.g., steel, cement, glass, non-ferrous, petrochemical, power plant, etc.)

Contact Us

    Please feel free to submit your inquiry using the form provided below, and we will provide you with a quote within 24 hours.

    Scroll to Top

    Leave Message Now

      Please feel free to submit your inquiry using the form provided below, and we will provide you with a quote within 24 hours.