Burner Nozzle Refractory Castables

  • Brand: Xintai
  • Material: High-Alumina Bauxite, Mullite, Corundum, Silicon Carbide, and Other Premium Refractory Aggregates
  • Refractoriness: ≥1790°C (subject to material grade and test conditions)
  • Alâ‚‚O₃ Content: 65–95% (Customizable)
  • Compressive Strength: 50–90 MPa (Typical Grade Range; Customized)
  • Bulk Density: 2.5–3.0 g/cm³ (Customizable)
  • Customization: Available
  • Application: Burner nozzles, burner blocks, combustion chambers, flame outlets, and combustion passages in industrial furnaces and kilns.

Burner Nozzle Refractory Castable is a specialized monolithic refractory material designed to protect burner assemblies and combustion zones in high-temperature industrial furnaces. It is used for manufacturing precast burner blocks and for in-situ casting of burner linings, flame outlets, combustion chambers, and internal combustion passages.

The material is formulated using selected high-alumina bauxite, mullite, corundum, silicon carbide, and other refractory aggregates, combined with fine powders, binders, and performance-enhancing additives. Depending on the operating temperature, furnace atmosphere, fuel type, and chemical exposure, the formulation can be adjusted to meet different industrial requirements.

Low-cement and ultra-low-cement bonding technologies can be adopted to improve packing density, reduce water demand, and enhance mechanical strength. With suitable aggregate grading and optimized binder systems, the castable provides reliable resistance to high-temperature flame exposure, particle erosion, thermal cycling, and mechanical impact.

Burner nozzle refractory castables are widely used in reheating furnaces, hot-blast stoves, regenerative burners, waste incinerators, cement kilns, lime kilns, and non-ferrous metal melting furnaces. Both precast components and cast-in-place solutions are available to accommodate different burner designs and installation requirements.

Ultra-low Cement Castable Refractory
Ultra-low Cement Castable Refractory
Ultra-low Cement Castable Refractory

Physicochemical Parameters

ItemXT-70XT-75XT-80XT-85
Al2O3 % ≥70758085
CaO % ≤2.52.52.52.5
Bulk density g/cm3  >2.62.752.82.9
Crushing strength Mpa(1400℃, 3h)>90>95>105>110
Modulus of rupture Mpa(1400℃, 3h)>13.0>13.5>15.0>16.0
Room temperature abrasion loss cm3<9.6<8.5<7.3<6
0.2MPa, refractoriness under load beginning temperature ℃>1450>1490>1530>1560
Thermal shock resistance(900℃, water cooling)/times>20>20>20>20
Max. working temperature ℃1550155016001600
Reheating linear change rate %<-0.3<-0.3<-0.2<-0.2

Product Features

  • High Refractoriness: Formulated with selected high-alumina and other premium refractory aggregates to withstand demanding high-temperature burner environments.
  • Excellent Mechanical Strength: Provides reliable structural support against high-speed gas flow, particulate impact, and mechanical abrasion.
  • Good Thermal Shock Resistance: Designed to accommodate repeated heating and cooling cycles, particularly in regenerative burner systems with frequent flow reversal.
  • Erosion Resistance: Helps protect burner openings and combustion passages against flame-driven particle erosion and high-velocity gas flow.
  • Volume Stability: Optimized aggregate grading and binder systems help control dimensional changes and maintain the geometry of burner openings during service.
  • Flexible Installation: Suitable for in-situ casting or factory production of precast burner blocks, allowing adaptation to complex shapes and furnace layouts.
  • Customizable Formulations: Available in different alumina contents, density grades, and strength levels to match specific temperatures, atmospheres, and operating conditions.

Applications

Burner Nozzle Refractory Castables are designed for refractory linings and components exposed to high temperatures, flame impact, and gas-flow erosion in industrial combustion systems.

  • Reheating and Heat Treatment Furnaces: Used in side burner blocks, burner throats, flame outlets, and combustion passages. The castable helps maintain burner geometry under continuous high-temperature operation.
  • Regenerative Burner Systems: Suitable for burner nozzles and combustion channels exposed to repeated temperature changes and frequent switching between heating cycles.
  • Hot-Blast Stoves: Applied to burner mixing chambers, throats, and adjacent refractory linings where thermal stability and mechanical strength are important.
  • Waste Incinerators and Thermal Oxidizers: Used in burner areas of waste incineration systems and regenerative or thermal oxidizers, subject to the operating atmosphere and chemical compatibility requirements.
  • Cement and Lime Kilns: Suitable for burner-end components and surrounding refractory structures exposed to high temperatures, flame impact, and abrasive dust.
  • Non-Ferrous Metal Melting Furnaces: Used around burner openings and combustion passages in aluminum, copper, and other non-ferrous metal melting equipment, with formulations selected for the specific atmosphere and exposure conditions.

Customization Services

Xintai provides customizable burner nozzle refractory castables to meet different furnace designs, combustion conditions, and installation requirements.

  • Customized Alumina Content: Available in different grades to balance refractoriness, strength, and material cost.
  • Density and Strength Options: Formulations can be adjusted to meet specified bulk density, compressive strength, and mechanical performance requirements.
  • Thermal Shock Optimization: Aggregate selection and particle grading can be tailored to suit frequent heating and cooling cycles.
  • Erosion-Resistant Formulations: Suitable aggregate and binder combinations can be selected for high-speed gas flow and abrasive particle exposure.
  • Precast and Cast-in-Place Solutions: Support for custom burner blocks, nozzles, throats, and complex internal geometries.
  • Installation and Drying Guidance: Technical recommendations can be provided for mixing, casting, curing, drying, and initial furnace heating.

For an accurate product recommendation, please share your burner drawings, target operating temperature, fuel type, furnace atmosphere, and expected service conditions.

Packing and Shipping Details

To maintain product quality during storage and transportation, burner nozzle refractory castables are packed according to their material characteristics and shipment requirements.

  • Standard Packaging: Moisture-resistant woven bags or paper-plastic composite bags.
  • Palletized Shipment: Reinforced pallets and protective wrapping are available for export orders.
  • Custom Packaging: Packaging specifications can be arranged according to order quantities and transportation requirements.
  • Storage Conditions: Store in a dry, well-ventilated area and protect the material from moisture and damaged packaging.
  • Shipping Support: Export packaging and shipment arrangements are available for bulk industrial orders.
Xintai Packing and shipping details
Xintai Packing and shipping details

About Xintai Refractory

Xintai Refractory is a professional manufacturer of refractory materials for high-temperature industrial applications. With over 20 years of experience, we supply refractory bricks, insulating bricks, refractory castables, and other monolithic refractory products for customers across various industrial sectors.

Our products serve applications in steelmaking, cement production, glass manufacturing, ceramics, non-ferrous metal processing, and power generation. We offer customized material formulations and technical support to help customers select suitable refractory solutions for their equipment and operating conditions.

For burner nozzle refractory castable specifications, customized formulations, or bulk quotations, please contact our team.

Related Products

More Refractory Products from Xintai Refractory

Please tell us your requirement by referring to the following aspects:

To provide you with an accurate quote and tailored solution, please specify your requirements based on the following aspects:

  1. Type of Refractory Products:
    What kind of refractory materials are you looking for? (e.g., fire bricks, castables, ceramic fiber, graphite products, etc.)

  2. Product Specifications:
    Please include detailed requirements such as size, quantity, working temperature, shape, etc.

  3. Application Industry:
    Which industry or application are you planning to use the refractory products in? (e.g., steel, cement, glass, non-ferrous, petrochemical, power plant, etc.)

Contact Us

    Please feel free to submit your inquiry using the form provided below, and we will provide you with a quote within 24 hours.

    Scroll to Top

    Leave Message Now

      Please feel free to submit your inquiry using the form provided below, and we will provide you with a quote within 24 hours.