Thermal Shock Resistance Fireclay Brick is a fired clay refractory product specially developed for applications exposed to repeated temperature fluctuations and thermal cycling. Made from carefully selected refractory clay and processed through controlled forming, drying, and high-temperature firing, the brick provides good thermal shock resistance together with stable high-temperature mechanical properties. With an Al₂O₃ content of at least 45%, Fe₂O₃ content of no more than 2.0%, and a bulk density of at least 2.15 g/cm³, this fireclay brick offers a balanced combination of chemical stability, structural strength, and thermal performance.
One of its key characteristics is its resistance to repeated thermal shock. Under the specified test condition of 1100°C water cooling, the thermal shock resistance is ≥20 cycles, making it suitable for refractory sections where frequent temperature changes could otherwise cause cracking, spalling, or premature lining failure.
The brick also provides a refractoriness under load of ≥1410°C at 0.2 MPa, helping maintain structural stability under elevated temperature and mechanical stress. Its controlled permanent linear change at 1400°C × 2h is -0.3% to +0.1%, indicating good dimensional stability during high-temperature service.
Physicochemical Parameters of Thermal Shock Resistance Fireclay Bricks
| Item | Unit | Specification |
|---|---|---|
| Al₂O₃ | % | ≥45 |
| Fe₂O₃ | % | ≤2.0 |
| Apparent Porosity | % | ≤22 |
| Bulk Density | g/cm³ | ≥2.15 |
| Cold Crushing Strength | MPa | ≥40 |
| Refractoriness Under Load, 0.2 MPa, T₀.₆ | °C | ≥1410 |
| Permanent Linear Change | % | -0.3 to +0.1 at 1400°C × 2h |
| Thermal Shock Resistance | Cycles | ≥20 at 1100°C water cooling |
| Recommended Application Area | — | Outer Ring of Premixing Chamber |
Product Features of Thermal Shock Resistance Fireclay Brick
- Excellent Thermal Shock Resistance: The brick achieves at least 20 thermal shock cycles under 1100°C water-cooling conditions, making it suitable for refractory structures exposed to repeated and rapid temperature changes.
- High Alumina Content: With an Al₂O₃ content of ≥45%, the brick provides good refractoriness and high-temperature stability for demanding industrial applications.
- Low Iron Oxide Content: The Fe₂O₃ content is controlled at ≤2.0%, helping improve the brick’s suitability for applications where lower impurity levels are required.
- Good Resistance to High-Temperature Deformation: A refractoriness under load of ≥1410°C at 0.2 MPa enables the brick to maintain its structural integrity under combined thermal and mechanical loads.
- Stable Dimensional Performance: The permanent linear change at 1400°C × 2h is controlled between -0.3% and +0.1%, reducing excessive dimensional changes during high-temperature operation.
- High Mechanical Strength: With a cold crushing strength of ≥40 MPa, the brick can withstand mechanical stresses during installation and furnace operation.
- Controlled Porosity: Apparent porosity of ≤22% provides a balance between thermal performance, mechanical strength, and resistance to penetration by furnace gases or corrosive substances.
- Dense and Uniform Structure: A bulk density of ≥2.15 g/cm³ contributes to good structural stability and reliable service performance.
Applications
Thermal Shock Resistance Fireclay Bricks can be used in a variety of thermal cycling and high-temperature applications, including:
- Premixing Chamber Outer Rings: Primarily used in the outer ring of premixing chambers, where refractory materials are exposed to repeated temperature fluctuations and thermal cycling.
- Industrial Furnace Linings: Suitable for selected furnace lining sections exposed to repeated heating and cooling cycles.
- Heating Equipment: Used in heating equipment where good thermal shock resistance and dimensional stability are required.
- Thermal Processing Equipment: Applicable to thermal treatment equipment operating under repeated temperature changes.
- Furnace Transition Sections: Suitable for transition areas subject to temperature fluctuations and thermal stress.
- Thermal Cycling Areas: Used in refractory structures exposed to frequent or repeated heating and cooling.
- High-Temperature Refractory Structures: Suitable for applications requiring a combination of high-temperature stability, mechanical strength, and thermal shock resistance.
Customization Services
To accommodate different furnace structures and installation requirements, Xintai Refractory provides customized solutions for Thermal Shock Resistance Fireclay Bricks:
- Dimensions: Standard and non-standard sizes available
- Shapes: Straight bricks, wedge bricks, arch bricks, and special-shaped bricks
- Application-Specific Design: Brick specifications can be selected according to furnace temperature and thermal cycling conditions
- Performance Requirements: Customized refractory solutions available according to operating conditions
- OEM Service: Product marking, packaging, and branding customization available
Packing and Shipping Details
Thermal Shock Resistance Fireclay Bricks are carefully packaged to protect their edges, surfaces, and overall structure during handling and transportation.
- Packing Method: Wooden pallets wrapped with polyethylene film and reinforced with steel straps
- Delivery Time: 15–40 days depending on order quantity and customization requirements
- Shipping Methods: Sea freight, air freight, railway transport, or truck transportation
Proper packaging and loading procedures help reduce the risk of damage during domestic and international transportation.
About Xintai Refractory
Xintai Refractory is a professional manufacturer with more than 20 years of experience in producing high-performance refractory materials. We specialize in refractory bricks, insulating bricks, castables, ramming masses, and monolithic refractory solutions for high-temperature industries worldwide.
Our refractory products are used in glass, steel, cement, ceramics, petrochemical, power generation, and non-ferrous metallurgy industries. Supported by controlled manufacturing processes, strict quality control, and customization capabilities, Xintai Refractory provides refractory solutions for applications requiring high-temperature stability, mechanical strength, and resistance to thermal cycling.























